Inspection

Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor.

Removal
1.

Turn off the ignition switch and then disconnect the battery (-) cable.

2.

Remove the under cover.

3.

Disconnect the input shaft speed sensor connector (A).

4.

Loosen the mounting bolt and then remove the input shaft speed sensor (B).

Installation
1.

Install in the reverse order of removal.

Tightening torque :

7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)

Яндекс.Метрика