Disconnect the negative (-) battery terminal.

Remove the lighting switch of the multifunction switch.

(Refer to Multifunction Switch)

With the front fog lamp switch, make sure that continuity exists between the terminals below.

If continuity is not as specified, replace the multi-function switch.

Disconnect the negative (-) battery terminal.

Remove the rear bumper cover.

(Refer to Body - "Rear Bumper Cover")

Disconnect the rear bumper main connector (A).

Disconnect the rear fog lamp connector (A) and ultrasonic sensor connector (B).

Separate the wiring harness fixed clip (A) from the rear fog lamp assembly.

Remove the bulb (A) after turning it counterclockwise.

Remove the rear fog lamp assembly (A) after loosening the mounting screws.

Install the rear fog assembly and connect the connector.

Install the rear bumper cover.