Install the jack to the edge of upper oil pan to support the engine.
Insert the rubber block between jack and oil pan.
Disconnect the ground cable (A).
Tightening torque:
10.8 ~ 13.7N.m (1.1 ~ 1.4kgf.m, 8.0 ~ 10.1lb-ft)
Remove the engine mounting support bracket (A).
Tightening torque
Nut (B) :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Bolt (C), Nuts (D) :
58.8 ~ 73.5N.m (6.0 ~ 7.5kgf.m, 43.4 ~ 54.2lb-ft)
Remove the engine mounting support bracket (E).
Tightening torque :
49.0 ~ 63.7N.m (5.0 ~ 6.5kgf.m, 36.2 ~ 47.0lb-ft)
Install in the reverse order of removal.
Remove the roll rod bracket (A).
Tightening torque
Bolts (B):
49.0 ~ 63.7N.m ( 5.0 ~ 6.5kgf.m, 36.2 ~ 47.0lb-ft)
Nut (C):
107.9 ~ 127.5N.m (11.0 ~ 13.0kgf.m, 79.6 ~ 94.0lb-ft)
Remove the roll rod mounting support bracket (A).
Tightening torque :
49.0 ~ 68.6N.m ( 5.0 ~ 7.0kgf.m, 36.2 ~ 50.6lb-ft)
Install in the reverse order of removal.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
Remove the under cover.
Install the jack to the edge of transaxle.
Remove the cover (A).
Remove the transaxle support bracket mounting bolt (A).
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Remove the transaxle mounting bracket (A).
Tightening torque :
49.0 ~ 63.7N.m (5.0 ~ 6.5kgf.m, 36.2 ~ 47.0lb-ft)
Install in the reverse order of removal.