4.
Are any DTCs present ?
YES
a.
Go to the applicable troubleshooting procedure.
NO
a.
System performing to specification at this time.
After a repair, it is essential to verify that the fault has been corrected.
Connect scantool and select "Diagnostic Trouble Codes(DTCs)" mode
Using a scantool, Clear DTC.
Operate the vehicle within DTC Detecting Condition in General Information. (Start and drive vehicle in gear and maintain vehicle speed at or above 15kmh. (9mph)
Are any DTCs present ?
YES
Go to the applicable troubleshooting procedure.
NO
System performing to specification at this time.
