Component Location
Description
1. General Description

The AUTO CRUISE indicator lamp is used to notify the driver when the auto cruise control is operating. The "AUTO CRUISE" indicator lamp is shut off as follows.

① Brake pedal is pressed

② Clutch pedal(M/T) is pressed

③ Select lever is shifted to any position other than "D","3","2","1" or "L"(A/T)

④ Cancel switch is operated

⑤ Stater switch or Main switch is turned off

⑥ Fail safe function is activated

⑦ Vehicle speed is about 40 Km/h

2. DTC Description

If the cruise control lamp circuit is shorted to battery or open during two driving cycles, this code will be set.

DTC Detecting Condition

DTC NO.

Detecting Condition

Possible Cause

P 1661

● P 1661

① Short circuit to battery line

② Short circuit to ground

③ Wire broken

④ Too high temperature in power stage

● Engine Condition : IG ON

● Fuel Limit : NO

● Fuel Cut : NO

● EGR OFF : NO

● MIL : NO

● Open or short in circuit

● Cruise control

● lamp bulb

● ECM

Schematic Diagram
note
To view Flash content, you need to install the appropriate browser extension
Яндекс.Метрика