REMOVAL (INCLUDING FUEL FILTER AND FUEL PRESSURE REGULATOR)
1.

Preparation

(1)

Remove the 2nd seat (Refer to "BD" group in this SERVICE MANUAL).

(2)

Open the carpet for fuel pump (A).

(3)

Remove the service cover for fuel pump (A).

(4)

Disconnect the fuel pump connector (A).

(5)

Start the engine and wait until fuel in fuel line is exhausted.

(6)

After engine stops, turn the ignition switch off.

2.

Disconnect the fuel feed quick-connector (A) and the suction tube quick-connector (B).

3.

Remove the plate cover (C) with the special service tool (SST No.: 09310-2B100) and the remove the fuel pump from the fuel tank.

INSTALLATION
1.

Install the fuel pump in according to the reverse order of "REMOVAL" procedure.

Fuel pump plate cover tightening: 58.8 ~ 68.6N·m (6.0~ 7.0kgf·m, 43.4 ~ 50.6lbf·ft)

Яндекс.Метрика