The clutch pedal and the clutch master cylinder are supplied as an assembly.
Inspect the continuity of the ignition lock switch.
Remove the floor mat before adjusting the clutch pedal.
Installation is in reverse order of removal.
Install a new one by tightening the bolts of the clutch pedal bracket.
TORQUE :
19~26 Nm(1.9~2.6 kgf.m, 13.8~18.9 Ib-ft)
Bleed the air in C.S.C.(Concentric Slave Cylinder) system refering to ADJUSTMENT PROCEDURE.
Adjust the clutch pedal and the ignition lock switch.
