Engine type | μ 2.7 | |
Manual transaxle type | MTA | |
Gear ratio | 1st | 3.615 |
2nd | 1.931 | |
3rd | 1.696 | |
4th | 1.276 | |
5th | 1.027 | |
Reverse | 3.588 | |
Final gear ratio | 5.071 / 3.737 | |
T/M oil capacity(ℓ)※ | 1.9 liter (2.0077US qt, 1.6718mp qt) | |
※ The quantity in the chart above is for the reference. The actual filling quantity of the automatic transaxle fluid must be set according to 'INSPECTION' or 'REPLACEMENT' procedure of the automatic transaxle fluid.
Recommended transaxle oil | SAE75W/85 or API GL-4 | ||
Check＆Replenishment | Every one year or every 100,000km | ||
Replacement | Private use | Normal use | No service required |
Severe use(※) | Every 100,000 Km | ||
Business use | |||
※ Severe use(marked '※') is defined as:
Driving on rough road(bumpy road, gravel road, snowy road, unpaved road etc.).
Driving on mountain road, ascent/descent.
Repetition of short distance driving.
More than 50% operation in heavy city traffic during hot weather above 32°C(89.6°F).
Police car, Taxi, Commercial type operation or trailer towing, etc.
Item | Nm | kgf.m | lb-ft |
Oil drain plug | 30~35 | 3.0~3.5 | 21.7~25.3 |
Oil filler plug | 30~35 | 3.0~3.5 | 21.7~25.3 |
Back up lamp switch | 30~35 | 3.0~3.5 | 21.7~25.3 |
Control shaft assembly | 10~12 | 1.0~1.2 | 7.2~8.7 |
Select lever | 43~55 | 4.3~5.5 | 31.1~39.8 |
Shift link assembly | 43~55 | 4.3~5.5 | 31.1~39.8 |
Transaxle mounting bracket assembly | 65~85 | 6.5~8.5 | 47.0~61.5 |
Transaxle and enging mounting bolt | 65~85 | 6.5~8.5 | 47.0~61.5 |
Item | Specification [mm(inch)] |
Differential end play | 0.15T-0.20T (0.0059T~0.0079T) |
Input shaft end play | 0.05T-0 (0.0020T~0) |
1st output shaft end play | 0.05T-0.10T (0.0020T~0.0039T) |
2nd output shaft end play | 0.05T-0.10T (0.0020T~0.0039T) |
1st gear end play | 0.135T-0.435T (0.0053T~0.0171T) |
2nd gear end play | 0.230T-0.430T (0.0091T~0.0169T) |
3rd gear end play | 0.142T-0.472T (0.0056T~0.0186T) |
4th gear end play | 0.230T-0.430T (0.0091T~0.0169T) |
5th gear end play | 0.125T-0.305T (0.0049T~0.0120T) |
Reverse gear end play | 0.135T-0.345T (0.0053T~0.0136T) |
Item | Lubricant | Quantity |
Transaxle input shaft splin | CASMOLY L9508 | 0.2 gr. |
Transaxle case gasket | LOCTITE 587 | As required |
Concentric slave cylinder assembly | KLUBER 9R100 | As reguired |
