2.
After loosening the seat assembly mounting bolts and nuts, remove the seat assembly (C).
Remove the seat assembly mounting cover (A).
After loosening the seat assembly mounting bolts and nuts, remove the seat assembly (C).
Installation is the reverse of removal.
SEAT MOUNTING BOLT INSTALLATION PROCE-DURE
Set the into the most rearward position.
Check then each slide is locked, and then tighten the front mounting bolt temporarily.
Set the seat into most forward position.
Check that each slide is locked, and then tighten the rear mounting bolt completely.
Set the seat into the most rearward position.
Check the front mounting bolt completely.
Check that the seat operates to and fro smoothy and the locking portion locks properly.
Remove the front cover (A).
Remove the recliner rever (A) and sliding rever (B).
Loosen the recliner mounting screw and clip, then remove the recliner cover (C).
Installation is the reverse of removal.
Remove front seat assembly.
Remove the recliner cover.
After disconnecting the scuff band (A), remove the seat back panel (B).
Remove the headrest and headrest guide.
Disconnect the protector (A) from the back frame.
Disconnect the connector (A).
Remove the seat back(A).
Remove the seat back cover (A).
Installation is the reverse of removal.
Remove front seat assembly.
Remove the recliner cover.
Disconnect the protector (A).
Disconnect the connector (A).
After removing the hog-ring clip (A) on the front of seat cushion and remove the seat cushion cover (B).
Disconnect the adhesives (A) on the front of seat cushion, remove the cushion cover (B).
Installation is the reverse of removal.
Remove the following items.
Recliner cover.
Seat back panel.
Headrest guide.
Seat back cover.
Seat cushion cover.
Remove the clip.
Remove the shift (A).
Remove the side air bag for replacing side air bag installation seat.
Be fore service, be fully aware of precautions and service procedure relevant to air bag. (See page RT-Airbag)
After loosening the mounting bolts, then disconnect the seat back frame (A) and seat cushion frame (B).
Installation is the reverse of removal.
Remove the seat back cover.
Seat back pad replacement (A).
Remove the seat back cover.
Seat cushion pad replacement (A).
