3.
Disconnect the PAB connector and remove the PAB mounting bolts (2EA).
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
Remove the glove box. (Refer to BD group)
Disconnect the PAB connector and remove the PAB mounting bolts (2EA).
Remove the crash pad. (Refer to BD group)
If the crash pad is damaged when the PAB is deployed, replace the damaged crash pad and PAB together.
Remove the heater duct from the crash pad.
Remove the mounting nuts(4EA) from the crash pad. Then remove the passenger airbag.
The removed airbag module should be stored in a clean and dry place with the pad cover face up.
