With the multi function switch in each position, make sure that continuity exists between the terminals below.

If continuity is not as specified, replace the multi-function switch

With the multi function switch in each position, make sure that continuity exists between the terminals below.

If continuity is not as specified, replace the multi-function switch.

Disconnect the negative (-) battery terminal.

Remove the steering column upper and lower shrouds (A) after removing 3 screws.

Remove the light switch (A) by pushing the lock pin after disconnecting the connector.

Remove the wiper switch (A) by pushing the lock pin after disconnecting the connector.

Installation is the reverse of removal.