3.
Disconnect the cruise control switch connector(B) and then remove the cruise control switch(A) with two screws.
Disconnect the battery (-) terminal.
Remove the driver side air bag module. (Refer to RT GR.)
Disconnect the cruise control switch connector(B) and then remove the cruise control switch(A) with two screws.
Installation is the reverse of removal.
Disconnect the cruise control switch connector from the control switch.
Measure resistance between terminals on the multifunctior switch when each function switch is ON (switch is depressed).
Function switch | Multifunction switch Terminal | Resistance |
Cruise Main | 5-6 | 3.9kΩ ± 1% |
Cancel | 6-7 | 0Ω ± 1% |
Set/Coast | 6-7 | 220Ω ± 1% |
Resume/Accel | 6-7 | 910Ω ± 1% |
If not within specification, replace switch.
