If an engine stalls when a vehicle is driven, engine stalling could be caused by poor connection.(harness or connector of the power, ground circuit) The purpose of inspection is to check poor connection(harness and connector) of the fuel system and ignition system.
Engine "ON" and allow the engine to warm up to normal operating temperature.
Connect a to Data Link Connector(DLC) and fix "Engine speed" and "Oxygen(HO2) sensor B1/S1 " data.
Driving the vehicle on the lifter and record items selected.
If engine stalls when the vehicle is driven, Check current data (Graph mode)
When current data is similar to [Fig.1],
Go to" CKPS circuit or Ignition system Inspection" procedure.
When current data is similar to [Fig.2]
Go to "Fuel system Inspection" procedure.
