3.
Check current data.
A.
Specification : Refer to current data as below.
caution
This current data is nothing but an example at certain condition. Thus, the real current data and waveform could be different from this example.
The purpose of the inspection is to classify the cause of "irregular hesitation". It is classified intake system and exhaust system.
Engine "ON" and allow the engine to warm up to normal operating temperature.
Connect a scantool to Data Link Connector (DLC).
Check current data.
Specification : Refer to current data as below.
This current data is nothing but an example at certain condition. Thus, the real current data and waveform could be different from this example.
Is current data normal?
When current data is similar to [Fig.3],
Go to "Catalytic converter Inspection" procedure.
When current data is similar to [Fig.4],
Go to "leakage of vacuum Inspection" procedure.
When current data is similar to [Fig.5],
Go to "PCSV Inspection" procedure.
