3.
Measure resistance between EGTS(T5-CPF) terminal 1 and 2, referring to resistance characteristic table of specification of General information.
Specification : Refer to Specification of General Information
IG KEY "OFF", ENGINE "OFF".
Disconnect EGTS(T5-CPF) connector.
Measure resistance between EGTS(T5-CPF) terminal 1 and 2, referring to resistance characteristic table of specification of General information.
Specification : Refer to Specification of General Information
Is the measured resistance at certain temperature within the specified resisance range at the temperature?
YES
▶Go to "Verification of Vehicle Repair".
NO
▶Replace EGTS(T5-CPF) and go to "Verification of Vehicle Repair".
