3.
Measure resistance between ECTS terminal 1 and 3, referring to resistance characteristic table of specification of General information.
Specification : Refer to Specification of General Information
IG KEY "OFF", ENGINE "OFF".
Disconnect ECTS connector.
Measure resistance between ECTS terminal 1 and 3, referring to resistance characteristic table of specification of General information.
Specification : Refer to Specification of General Information
Is the measured resistance at certain temperature within the specified resisance range at the temperature?
YES
▶Is the measured resistance at certain temperature within the specified resisance range at the temperature?
NO
▶Replace ECTS and go to "Verification of Vehicle Repair".
