2.
Clamp the clutch master cylinder hose(A). If there is no enough room for clamping, you can also clamp the hose from the brake master cylinder side.
[LHD]
[RHD]
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
Remove the brake fluid fron the clutch master cylinder reservoir with a syringe.
Clamp the clutch master cylinder hose(A). If there is no enough room for clamping, you can also clamp the hose from the brake master cylinder side.
Disconnect the hose(A) from the cylinder by releasing the clutch master cylinder clamp.
Remove the ignition lock switch.
Remove the clutch pedal assembly mounting nuts (A-3ea) and bolt (B-2ea).
Remove the clutch pedal and the master cylinder assembly together.
