4.
Installation is the reverse of removal.
When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
Remove the roof trim.
Remove the roof rack cover (A).
After loosening the mounting nuts, then remove the roof rack (B).
Installation is the reverse of removal.
When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
Remove the mud guard and wheel guard.
Installation is the reverse of removal.
When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
Remove the side garnish.
Remove the tailgate trim.
Remove the speaker.
Disconnect the connector (A).
Loosen the rear garnish mounting nuts.
Remove the rear garnish (A).
Installation is the reverse of removal.
Remove the tailgate upper trim.
Disconnect the connector (A).
Loosen the mounting nuts.
Remove the spoler(B).
Installation is the reverse of removal.
