3.
Open the carpet (A) for the fuel pump.
Turn ignition switch OFF and disconnet the negative (-) battery cable.
Remove the 2nd seat (Refer to group "BD" in this Shop Manual).
Open the carpet (A) for the fuel pump.
Remove the fuel pump service cover (A).
Disconnect the fuel pump connector (A), the fuel feed tube quick - connector (B), the fuel return tube quick - connector (C) and the suction tube quick - connector (D).
Remove the fuel pump after removing the fuel pump plate cover (E) with SST (No.:09310-2B100).
Install the fuel pump according to the reverse order of "REMOVAL" procedure.
Fuel pump plate cover tightening : 5.9 ~ 6.9 N·m (0.6 ~ 0.7 kgf·m, 4.3 ~ 5.1 lbf·ft)
