3.
Open the carpet (A) for the sub fuel sender.
Turn ignition switch OFF and disconnet the negative (-) battery cable.
Remove the 2nd seat (Refer to group "BD" in this Shop Manual).
Open the carpet (A) for the sub fuel sender.
Remove the sub fuel sender service cover (A).
Disconnect the sub fuel sender connector (A) and the suction tube quick - connector (B).
Remove the sub fuel sender after removing the fuel pump plate cover (C) with SST (No.:09310-2B100).
Install the sub fuel sender according to the reverse order of "REMOVAL" procedure.
Sub fuel sender plate cover tightening : 5.9 ~ 6.9 N·m (0.6 ~ 0.7 kgf·m, 4.3 ~ 5.1 lbf·ft)
