1.
Remove the upper cover(A) from the center console.
[LHD]
[RHD]
Remove the upper cover(A) from the center console.
Remove the center console.(see to BD group)
Remove the snap pin(A) from the select cable and the clips(B).
Remove the clip(A) from the shift cable.
Remove the shift lever assembly(A).
Remove the retainer(A) and the nuts(B).
Remove the cable assembly from the transaxle.(see Transaxle removal)
Remove the select and shift cable assemblies.
Install the cable assembly placing the select and shift lever in neutral position.(see to Transaxle installation)
Install the retainer(A) and nuts(B).
Install the shift lever assembly(A).
TORQUE :
9~14Nm(0.9~1.4kgf.m, 6~9.5Ib-ft)
Install the clip(A) connecting the shift cable and the shift lever.
Move the slide clip(B) of guide member(A) in the direction as shown in the illustration.
Adjust the slide clip fit into the select lever moving the slide clip in the direction.
Install the guide member(A) of the select cable(B).
Adjust the slide clip(B) to fit it into the select lever pin(A) and install the snap pin(C).
Insert the slide clip in the direction as shown in the illustration.
Install the center console(A).
Install the upper cover(A) to the center conole.
Check the select cable for proper operation and for damage.
Check the shift cable for proper operation and for damage.
Check the boots for damage.
Check the boots for wear abrasion sticking, restricted movement or damage.
Check for the weak or damaged spring.
