Preparation
Remove the 2nd seat (Refer to "BD" group in this SERVICE MANUAL).
Open the carpet for fuel pump (A).
Remove the service cover for fuel pump (A).
Disconnect the fuel pump connector (A).
Start the engine and wait until fuel in fuel line is exhausted.
After engine stops, turn the ignition switch off.
Open the carpet for sub fuel sender (A).
Open the service cover for sub fuel sender (A).
Disconnect the sub fuel sender connector (A) and the suction tube quick-connector (B).
Remove the plate cover (C) with the special service tool (SST No.: 09310-2B100) and remove the sub fuel sender from the fuel tank.
Install the sub fuel sender in according to the reverse order of "REMOVAL" procedure.
Sub fuel sender plate cover tightening: 58.8 ~ 68.6N·m (6.0~ 7.0kgf·m, 43.4 ~ 50.6lbf·ft)
