1.
Install the flow control spring (B), the flow control valve (A) and the connector into the pump body.
Install the flow control spring (B), the flow control valve (A) and the connector into the pump body.
Install the oil seal in the pump body by using the special tool (09222-32100).
After inserting the shaft assembly into the pump body, install the dust spacer and snap ring (A).
Install the pump pulley(A).
Tightening torque :
55 ~ 69 Nm (5.5 ~ 6.9 kgf·m, 39.8 ~ 49.9 lb-ft)
Install the inner O-ring and outer O-ring (A).
Install the oil pump side plate (A).
After inserting the lock pin into the groove of the front housing, install the camring (A) attending to the direction.
Install the rotor and the vanes.
Install the gasket and oil pump cover assembly (A).
Tightening torque Nm (kgf-m, lb-ft):
15.3 ~ 20.2 (1.56 ~ 2.04, 11.3 ~ 14.9)
Install the O-ring (A) and the suction pipe mounting bolt.
Tightening torque Nm (kgf-m, lb-ft):
13.6 ~ 18.4 (1.36 ~ 1.84, 9.84 ~ 13.3)
