1.
Remove both decoration cover (A).
Put on glove to protect your hands.
Remove both decoration cover (A).
Remove the glass (A) by lifting it up.
Do not damaged the roof panel.
Installation is the reverse of removal.
Remove the over head console.
Confirm the position of guide whether it is closed or not when you remove the motor.
Disconnect the motor connector (A), remove the screws and then remove the motor (B).
Installation is the reverse of removal.
Make sure to initialize the motor.
Open the glass fully.
Disconnect the deflector link (A) from the frame (B), and then remove the deflector (C).
Installation is the reverse of removal.
Remove the follows parts.
Front and rear door scuff trim.
Front pillar trim.
Center and rear pillar trim.
Headliner.
Sunroof glass.
Disconnect the drain tubes (A).
Remove the bracket (C).
After loosening the mounting bolts and nuts, remove the sunroof assembly (B).
Take care not to scratch the interior trims and other parts.
Installation is the reverse of removal.
Remove the sunroof assembly.
Remove the drip link (A) and sunshade stopper (B).
Remove the sunshade (C) and drip rail (D).
Installation is the reverse of removal.
Remove the sunroof assembly.
Remove a guide assembly (A) after lowering a guide thoroughly by pushing a slide (B) to rear.
Remove the guide (A) and slide (B).
Installation is the reverse of removal.
Make sure to align the slide with the center of “A” and “B”
Make sure to initialize the motor.
