Items | Specification | ||
Ignition coil | Primary resistance | 0.715 ± 0.015 Ω | |
Secondary resistance | - | ||
Spark plugs | NGK | ILFR5B11 | |
Plugs Gap | 1.0 ~ 1.1 mm (0.0394 ~ 0.0433 in) | ||
Items | Specification | ||
Starter | Rated voltage | 12 V, 1.2 kW | |
No. of pinion teeth | 8 | ||
No-load characteristics | Voltage | 11.5 V | |
Ampere | 90A, MAX | ||
Speed | 2,600 rpm, MIN | ||
Items | Specification | |
Alternator | Type | Battery voltage sensing |
Rate voltage | 13.5 V, 110A | |
Speed in use | 1,000 ~ 18,000 rpm | |
Voltage regulator | Electronic built-in type | |
Regulator setting voltage | 14.2 ~ 14.8V | |
Battery | Type | MF 68AH |
Cold cranking amperage [at -18°C(-0.4°F)] | 600 A | |
Reserve capacity | 110 min | |
Specific gravity [at 20°C(68°F)] | 1.280 ± 0.01 | |
COLD CRANKING AMPERAGE is the amperage a battery can deliver for 30 seconds and maintain a terminal voltage of 7.2V or greater at a specified temperature.
RESERVE CAPACITY RATING is amount of time a battery can deliver 25A and maintain a minimum terminal voltage of 10.5V at 26.7°C(80.1°F).
Items | Specification |
Setting error | Within ± 1.5Km/h on level road |
Vehicle speed memory variation | No variation |
Setting time | 0.1sec max |
Resuming time | 0.1sec max. |
Minimum operating speed | 40 ± 2Km/h |
Cancel speed range | 15 ± 2Km/h |
Maximum memorized speed | 160 ± 2Km/h |
Pulling force | 127N(13Kgf) |
Main switch serial resistance value | 3.9kΩ ± 1% |
Command switch serial resistance value | SET switch : 220Ω ± 1% |
RESUME switch : 910Ω ± 1% |
