1.
Remove the air cleaner assembly. (LHD only)
Remove the air cleaner assembly. (LHD only)
Disconnect the vacuum hose (A), vacuum switch connector (B) from the brake booster.
Disconnect the brake fluid level switch connector (C) from the reservoir.
Remove the master cylinder. (Refer to Master cylinder)
Remove the snap pin (A) and joint pin (B).
Remove the brake booster by loosening the mounting nuts.
Tightening torque Nm (kgf.m, lb-ft):
13 ~ 16 (1.3 ~ 1.6, 9.4 ~ 11.6)
