6.
Is the measured voltage within specification?
YES
a.
Go to "Component Inspection" procedure.
NO
a.
Repair short in sensing circuit or MIL circuit and go to "Verification of Vehicle Repair" procedure.
■ Check Generator circuit
IG "OFF"
Disconnect Generator connector.
IG "ON" and ENG "OFF"
Measure the voltage between lamp terminal of Generator and chassis gound.
Measure the voltage between FR terminal of Generator and chassis gound.
Specification : B+
Is the measured voltage within specification?
YES
Go to "Component Inspection" procedure.
NO
Repair short in sensing circuit or MIL circuit and go to "Verification of Vehicle Repair" procedure.
