7.
Ignition "OFF" and then ignition "ON". Go to "Component Inspection"Procedure.
Fig 1) ANTI-LOCK brake system : VARIENT CODING
Fig 2) Verient coding completion.
Check for improper installation of EMS/TCU/ESP.
Connect scantool to Data Link Connector(DLC).
Ignition "ON".
Go in varient coding (figure 1).
Perform variant code. (Press the REST button-figure 2).
Disconnect scantool.
Ignition "OFF" and then ignition "ON". Go to "Component Inspection"Procedure.
Fig 1) ANTI-LOCK brake system : VARIENT CODING
Fig 2) Verient coding completion.
