1.
Install the bushing (B) on the stabilizer bar (A).
note
Bring clamp (C) of stabilizer bar (A) into contact with bushing (B).
Install the bushing (B) on the stabilizer bar (A).
Bring clamp (C) of stabilizer bar (A) into contact with bushing (B).
Install the bracket on the bushing (B).
Install the stabilizer bar to the sub frame.
Install the stabilizer bar bracket (A) mounting bolts (B).
:
Bolt(B) : 49.0~63.7 (5.0~6.5, 36.2~47.0)
Install the sub frame (A) by supporting it with a jack.
Install the sub frame stay mounting bolts(A), nuts(B) and the sub frame mounting bolts(C).
:
Bolt(A) : 68.6~88.3 (7.0~9.0, 50.6~65.1)
Nut(B) : 68.6~88.3 (7.0~9.0, 50.6~65.1)
Bolt(C) : 137.3~156.9 (14~16, 101.3~115.7)
Install the front roll stopper mounting bolts (A).
:
Bolt(A) : 49.0~63.7 (5.0~6.5, 36.2~47.0)
Bolt(B) : 78.5~98.1 (8.0~10.0, 57.9~72.3)
Install the rear roll stopper mounting bolts (A).
:
Bolt(A) : 49.0~63.7 (5.0~6.5, 36.2~47.0)
Install the front muffler (A).
:
39.2~58.8 (4.0~6.0, 28.9~43.4)
Install the connecting bolt (A) between the steering universal joint assembly and the pinion shaft.
:
29.4~44.1 (3.0~4.5, 21.7~32.5)
Reconnect the EPS connector (B).
Install the under cover (A).
:
16.7~25.5 (1.7~2.6, 12.3~18.8)
Install the split pin and front lower arm mounting bolt (B) to the knuckle (A).
:
98.1~117.7 (10.0~12.0, 72.3~86.8)
Install the front stabilizer link (A) to the strut assembly.
Tightening torque Nm (kgf-m, lb-ft):
Nut(B) : 98.1~117.7 (10.0~12.0, 72.3~86.8)
Install the wheel and tire (A) to the front hub (B).
Tightening torque Nm (kgf-m, lb-ft):
88.3~107.9 (9~11, 65.1~79.6)
Be careful not to damage the hub bolts (C) when installing the front wheel and tire (A).
