2.
After raise the lower anchor cover (A), loosen the lower anchor mounting bolt (B).
When installing the belt, make sure not to damaged the pretensioner.
Remove the following items first.
Front seat assembly.
Front and rear door scuff trim.
After raise the lower anchor cover (A), loosen the lower anchor mounting bolt (B).
Remove the center pillar lower trim.
Remove the center pillar upper trim.
Remove the upper anchor (A).
After disconnecting the pretensioner connector lock pin, remove the connector (B), Loosen the mounting bolt, then remove the pretensioner (C).
Installation is the reverse of removal.
When installing the belt, make sure not to damaged the pretensioner.
Remove the following items first.
Rear seat assembly.
Rear door scuff trim.
Remove the lower anchor (A).
Remove the third seat lower anchor and lower anchor.
Remove the luggage side trim.
Remove the gate pillar trim.
Remove the upper anchor (A).
After loosening the retractor (B) mounting bolt, remove the rear seat belt (C).
Installation is the reverse of removal.
Remove the secondary seat assembly.
Remove the seat back cover.
After loosening the mounting bolts, then remove the seat belt (A).
Installation is the reverse of removal.
When installing the belt, make sure not to damaged the pretensioner.
Remove the following items first.
Rear seat assembly.
Rear door scuff trim.
Tranverse trim.
Remove the upper anchor (B).
Remove the lower anchor (A).
Remove the secondary seat lower anchor.
Remove the luggage side trim.
After loosening the retractor (B) mounting bolt, remove the rear seat belt.
Installation is the reverse of removal.
Remove the front seat assembly.
Remove the wire harness of buckle from seat.
Remove the seat belt buckle (A).
Installation is the reverse of removal.
Remove the secondary seat assembly.
Remove the secondary seat cushion.
Remove the seat belt buckle (A).
Installation is the reverse of removal.
Remove the third seat assembly.
Remove the seat belt buckle (A).
Installation is the reverse of removal.
Remove the following items first.
Front assembly.
Front and rear door scuff trim.
Front seat belt upper and lower anchor.
Center pillar lower and upper trim.
Loosen the mounting bolts, then remove the height adjuster (A).
Installation is the reverse of removal.
