Check actuator motor
Ignition "OFF".
Disconnect intake actuator.
Connect (+) terminal of battery to one motor terminal and (-) terminal to the other motor terminal of intake actuator.
Dose the actuator work properly?
YES
Go to "Check potentiometer" procedure.
NO
Substitute with a known-good actuator and check for proper operation. If the problem is corrected, replace actuator and then go to "Verification of Vehicle Repair" procedure.
Check actuator potentiometer
Ignition "ON".
Connect intake actuator.
Measure voltage between terminal "5" and "6"(RHD) or "6" and "7"(LHD) of passenger air mix actuator while operating the intake switch.
Specification : Refer the specifications in fig3)
Is the measured voltage within specifications in fig3)?
YES
Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.
NO
Substitute with a known-good actuator and check for proper operation. If the problem is corrected, replace actuator and then go to "Verification of Vehicle Repair" procedure.
