Monitor Scantool Data
1.

Connect Scantool to Data Link Connector (DLC).

2.

Warm engine up to normal operating temperature.

3.

Turn "OFF" electrical devices and A/C.

4.

Monitor "E/GAS TEMP. PRE VGT","E/GAS TEMP. PRE DPF" parameter on the Scantool.

Specification : "E/GAS TEMP." is displayed.

Fig 1) "EXHAUST GAS TEMP." at idle is shown. Monitor if abnormall difference between "Fig. 1) data" and the data from the vehicle to test.

Яндекс.Метрика