The TCM can either receive data from the Engine Control Module or ABS control module, or it can send data to the ECM and ABSCM by using CAN communication. The CAN communicaton is one of the vehicle communications method, which is now widely used to transfer the vehicle data.
When the TCM cannot read the data from the ECM through the CAN-BUS line, the TCM sets this code.
CAN-BUS circuit malfunctioning or ECM can be a posssible cause of this DTC.
Item | Detecting Condition & Limp Home | Possible Cause |
DTC Strategy | ● Check voltage range | ● Open or Short in CAN communication harness ● Faulty ECM ● Faulty TCM |
Enable Conditions | ● Not FailSafe Status ● IG "ON" ● Ne ≥ 100rpm | |
Threshold Value | ● Receive a message "BUS OFF" from CAN MI-COM | |
Diagnostic Time | ||
Fail Safe | ● INTELLIGENT SHIFT and is inhibited ● Learning for oil pressure control is inhibited ● Torque Retard requirement is inhibited. ● Direct connection control of TCC is inhibited. |
