Removal
[Intake air temperature sensor (IATS) #1]
1.

Turn the ignition switch OFF and disconnect the battery (-) cable.

2.

Remove the intake air temperature sensor #1 connector (A) and the installation clamp (B).

3.

Remove the intake air temperature sensor #1 after removing the installation bolt.

[Intake air temperature sensor (IATS) #2]
4.

Turn the ignition switch OFF and disconnect the battery (-) cable.

5.

Remove the air duct and the air cleaner.

6.

Remove the intake air temperature sensor #2 (B) after disconnecting the connector (A).

Яндекс.Метрика