1.
Remove the windshield wiper arm and blade after removing a nut (A).
Tighting torque :
28~32 Nm (2.8~3.2 kgf.m, 20~23.1 lbf.ft)
Remove the windshield wiper arm and blade after removing a nut (A).
Tighting torque :
28~32 Nm (2.8~3.2 kgf.m, 20~23.1 lbf.ft)
Remove the weather strip and the cowl top cover (A) after removing 4 rivets.
Remove the windshield wiper motor and linkage assembly after removing 2 bolts. Disconnect the wiper motor connector and windshield deicer connector from the wiper motor ＆ linkage assembly.
Tighting torque :
7~11Nm (0.7~1.1, kgf.m, 5.0~7.9 lbf.ft)
Installation is the reverse of removal.
Set the cowl top cover on the specified spray position.
When you turn on the washer, confirm 50% or more of washer fluid lands within the spray area.
If the spray area is not within the standard positions, adjust the nozzle(s).
