1.
Disconnect the battery negative terminal (A) first, then the positive terminal (B).
Disconnect the battery negative terminal (A) first, then the positive terminal (B).
Using the hexagon wrench, turn the tensioner conterclockwise, then remove the drive belt(A).
Disconnect the alternator connector(A), and remove the cable(B) from alternator "B" terminal.
Remove the alternator (A).
Tightening torque :
49.0 ~ 63.7N.m (5.0 ~ 6.5kgf.m, 36.2 ~ 47.0lb-ft)
Installation is the reverse order of removal.
