1.
Disconnect the push rod from the master cylinder by removing the snap pin (A), washer (B) and the bolts (C).
Tightening torque :
(C) 11.8~14.7N.m (1.2~1.5kgf.m, 8.7~10.9lb-ft)
Disconnect the push rod from the master cylinder by removing the snap pin (A), washer (B) and the bolts (C).
Tightening torque :
(C) 11.8~14.7N.m (1.2~1.5kgf.m, 8.7~10.9lb-ft)
Disconnect the two ignition lock switch connectors.
Remove the clutch pedal mounting bolts (A-2ea) and the bracket mounting nuts (B-3ea).
Tightening torque :
(A,B) 16.7~25.5N.m (1.7~2.6kgf.m, 12.3~18.8lb-ft)
Remove the clutch pedal assembly.
