1.
Install the bushing (B) on the stabilizer bar (A).
note
Bring clamp (C) of stabilizer bar (A) into contact with bushing (B).
Install the bushing (B) on the stabilizer bar (A).
Bring clamp (C) of stabilizer bar (A) into contact with bushing (B).
Install the bracket on the bushing (B).
Install the stabilizer bar to the sub frame.
Install the stabilizer bar bracket (A) mounting bolts (B).
Tightening torque
Bolt(B)
: 49.0 ~ 63.7N.m (5.0 ~ 6.5kgf.m, 36.2 ~ 47.0lb-ft)
Install the sub frame (A) by supporting it with a jack.
Install the sub frame stay mounting bolts(A), nuts(B) and the sub frame mounting bolts(C).
Tightening torque
Bolt(A)
: 68.6 ~ 88.3 N.m (7.0 ~ 9.0kgf.m, 50.6 ~ 65.1lb-ft)
Nut(B)
: 68.6 ~ 88.3 N.m (7.0 ~ 9.0kgf.m, 50.6 ~ 65.1lb-ft)
Bolt(C)
: 137.3 ~ 156.9N.m (14 ~ 16kgf.m, 101.3 ~ 115.7lb-ft)
Install the front roll stopper mounting bolts (A).
Tightening torque
Bolt(A)
: 49.0 ~ 63.7N.m (5.0 ~ 6.5kgf.m, 36.2 ~ 47.0lb-ft)
Bolt(B)
: 78.5 ~ 98.1N.m (8.0 ~ 10.0kgf.m, 57.9 ~ 72.3lb-ft)
Install the rear roll stopper mounting bolts (A).
Tightening torque
Bolt(A)
: 49.0 ~ 63.7N.m (5.0 ~ 6.5kgf.m, 36.2 ~ 47.0lb-ft)
Install the front muffler (A).
Tightening torque
: 39.2 ~ 58.8N.m (4.0 ~ 6.0kgf.m, 28.9 ~ 43.4lb-ft)
Install the connecting bolt (A) between the steering universal joint assembly and the pinion shaft.
Tightening torque
: 29.4 ~ 44.1N.m (3.0 ~ 4.5kgf.m, 21.7 ~ 32.5lb-ft)
Reconnect the EPS connector (B).
Install the under cover (A).
Tightening torque
: 16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3 ~ 18.8lb-ft)
Install the split pin and front lower arm mounting bolt (B) to the knuckle (A).
Tightening torque
: 98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)
Install the front stabilizer link (A) to the strut assembly.
Tightening torque
Nut(B)
: 98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)
Install the wheel and tire (A) to the front hub (B).
Tightening torque
: 88.3 ~ 107.9N.m (9 ~ 11kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage the hub bolts (C) when installing the front wheel and tire (A).
