Description
1.

Mode

(1)

Virgin State

A.

The receiver as a sole part is shipped in this state. Replacement parts should therefore arrive in this state.

B.

In this state, there is no Auto-Location, no sensor wake-up, no sensor monitoring and no DTC monitoring..

C.

The state indicates that platform specific parameters must be written to the receiver and that sensors are un-learned.

(2)

Normal State

A.

In order for tire inflation state and DTC monitoring to occur, the receiver must be in this state.

B.

In this state, automatic sensor location / learning is enabled.

2.

Overview

A.

Sends LF command data to initiators.

B.

Controls sensor state:

Ignition on - Normal Delayed

Ignition off - Storage.

C.

Auto-Locates sensors.

D.

Auto-Learns new sensors.

E.

Receives RF data from sensor.

F.

Uses sensor data to decide whether to turn on TREAD Lamp / wheel location LED's.

G.

Uses sensor information, distance traveled, background noise levels, Auto-learn status, short circuit output status, vehicle battery level, internal receiver states to determine if there is a system or a vehicle fault.

Operation
1.

General Function

A.

Auto-locate/learn takes place only once per Ignition cycle.

B.

On successful completion, 4 road wheel sensor ID's, together with their respective road wheel positions are latched into memory for monitoring.

C.

Until Auto-learn completes, previously learned sensors (together with their respective locations) are monitored for under inflation / leak warnings.

D.

Spare tire inflation / DTC state is not displayed.

2.

General Conditions to Learn New Sensors:

A.

Receiver must Auto-Locate 4 road sensors.

B.

Auto-location / learning only functions when speed is more than 20 kph (approx. 15 mph).

C.

Receiver must determine that it is confident that sensor is not temporary:

Uses vehicle speed.

Uses confidence reduction of previously learned sensors.

D.

Typical time at driving over 20 kph to learn a new sensor is up to 10 minutes.

3.

General Conditions to Un-Learn a sensor that is removed:

A.

It takes less than 10 minutes at 20~30kph.

B.

Confidence reduction is dependant on vehicle speed and the number of sensors known to the receiver.

Яндекс.Метрика