Side Impact Sensor(SIS) is located in both side of center pillar detects broad collision.
When SIS delivers collision signal to SRSCM, SRSCM checks if safing sensor located in SRSCM detects collusion.
and if both SIS and safing sensor detects collision simultaneously, SRSCM operates side air bag.
If you strike or spin the SRSCM at the IG “ON” state, the seat-belt pretensioner, curtain-airbag or side-airbag could be unfolded and bring on danger. Handle it with care.
The SRSCM sets DTC B1400 if there is any fault in DSIS circuit.
Item | Detecting Condition | Possible cause | |
DTC Strategy |
•
Check Data |
•
Faulty DSIS circuit.
•
Faulty DSIS.
•
SRSCM. | |
Enable Conditions |
•
Ignition "ON" | ||
Threshold Value |
•
DSIS send defect code
•
DSIS output is not expected value | ||
Diagnostic Time | Qualification |
•
More than 120ms (30ms x 4) | |
De-Qualification |
•
More than 240ms (30ms x 8) |