3.
Check "Actuator" parameter on scantool. (It should be checked while the vehicle is unloaded condition)
Specification : 20%±2%
Connect scantool with Diagnostic Connector.
Engine "ON" and Turn on the auto head light system.
Check "Actuator" parameter on scantool. (It should be checked while the vehicle is unloaded condition)
Specification : 20%±2%
Is parameter displayed within the Specification?
 | ▶ This is a intermittent problem caused by poor contact of component or Control Unit ▶ Thoroughly check the looseness, poor connection, bent, corrison, contamination, deformation or damage of connector. ▶ Repair or replace as necessary and then, go to "Verification of Vehicle Repair" procedure. |
 | ▶ Go to "Inspection and Repair" procedure. |
