The vehicle applying the generation of electricity control stop the control when ECM receive the signal of wiper or headlamp using much current.So wiper signal is used to inhibit the control.
P1575 is set when wiper signal is high(battery voltage) for 10sec.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
Signal monitoring |
•
Wiper motor circuit
•
Wiper motor | ||
Enable Conditions |
•
IG "ON" | |||
Threshold value |
•
Wiper motor is short to battery | |||
Diagnosis Time |
•
10 sec | |||
Fail Safe | Fuel cut | NO |
•
- | |
EGR Off | NO | |||
Fuel Limit | NO | |||
Check Lamp | OFF | |||
