Monitor Scantool data
■ Check DTC
1.

Check DTC with scantool.

2.

Check DTC related CAN communication is set on PDM.

3.

If there is DTC related PDM, Check the DTC according to troubleshooting guide

4.

Repair and erase the DTC with Scantool.

5.

Is the DTC erased ?

▶ Check poor connection between harness connector and each module

: Thoroughly check the looseness, poor connection, bent, corrison, contamination, deformation or damage of connector. Repair or replace as necessary and then, go to "Verification of Vehicle Repair" procedure.

▶ Go to next procedure.

Яндекс.Метрика