Connect 'TPMS exciter' or GDS to Data Link Connector(DLC).
Select "TPMS DIAGNOSIS" mode.
Select the "FULL" mode of "LFI STATUS" function.
Monitor the parameters of Front Left LFI on the 'TPMS exciter' or GDS.
Specification : 'Front Left No Response Pulse Recvd' is 'NO'.
'Front Left Fail Pulse Detected' is 'NO'.
'Front Left Pass Pulse Detected' is 'YES'.
'Front Left Short to Battery' is 'NO'.
'Front Left Short to Ground' is 'NO'.
Are parameters within specifications?
 | ▶ Fault is intermittent. It has been repaired and TPMS receiver module memory is not cleared yet. ▶ Go to "Verification of vehicle Repair" procedure. |
 | ▶ Go to "Inspection/Repair" procedure. |
