Connect 'TPMS exciter' or GDS to Data Link Connector(DLC).
Select "TPMS DIAGNOSIS" mode.
Select the "FULL" mode of "LFI STATUS" function.
Monitor the parameters of Front Right LFI on the 'TPMS exciter' or GDS.
Specification : 'Front Right No Response Pulse Recvd' is 'NO'.
'Front Right Fail Pulse Detected' is 'NO'.
'Front Right Pass Pulse Detected' is 'YES'.
'Front Right Short to Battery' is 'NO'.
'Front Right Short to Ground' is 'NO'.
Are parameters within specifications?
 | ▶ Fault is intermittent. It has been repaired and TPMS receiver module memory is not cleared yet. ▶ Go to "Verification of vehicle Repair" procedure. |
 | ▶ Go to "Inspection/Repair" procedure. |
