Connect 'TPMS exciter' or GDS to Data Link Connector(DLC).
Select "TPMS DIAGNOSIS" mode.
Select the "FULL" mode of "LFI STATUS" function.
Monitor the parameters of Rear Right LFI on the 'TPMS exciter' or GDS.
Specification : 'Rear Right No Response Pulse Recvd' is 'NO'.
'Rear Right Fail Pulse Detected' is 'NO'.
'Rear Right Pass Pulse Detected' is 'YES'.
'Rear Right Short to Battery' is 'NO'.
'Rear Right Short to Ground' is 'NO'.
Are parameters within specifications?
 | ▶ Fault is intermittent. It has been repaired and TPMS receiver module memory is not cleared yet. ▶ Go to "Verification of vehicle Repair" procedure. |
 | ▶ Go to "Inspection/Repair" procedure. |
