4.
Operate "TPMS Tread Lamp" item of the Actuation Test by force.
Specification: The Tread Lamp turns on.
Fig.1) Displayed data when the "Tread Lamp" turns on by force.
Park the vehicle on an even ground.
Connect GDS to Data Link Connector(DLC).
IG "ON"
Operate "TPMS Tread Lamp" item of the Actuation Test by force.
Specification: The Tread Lamp turns on.
Fig.1) Displayed data when the "Tread Lamp" turns on by force.
Is the service data shown normally?
 | ▶ Fault is intermittently caused then go to "Verification of Vehicle Repair" procedure. |
 | ▶ Go to Next procedure. |
