5.
Check that the motor operates at high speed.
1. 1 2. B+ 3. Parking | 4. High 5. GND 6. Low |
Remove the connector from the wiper motor.
Attach the positive (+) lead from the battery to terminal 6 and the negative (-) lead to terminal 5.
Check that the motor operates at low speed.
Connect the positive (+) lead from the battery to terminal 4 and the negative (-) lead to terminal 5.
Check that the motor operates at high speed.
1. 1 2. B+ 3. Parking | 4. High 5. GND 6. Low |
Operate the motor at low speed using the stalk control.
Stop the motor operation anywhere except at the off position by disconnecting terminal 6.
Connect terminals 3 and 6.
Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 5.
Check that the motor stops running at the off position.
