2.
Remove the crash pad lower panel (A).
(Refer to the BD group - "Crash pad")
Disconnect the negative(-) battery terminal.
Remove the crash pad lower panel (A).
(Refer to the BD group - "Crash pad")
Remove the steering column shroud assembly.
(Refer to the BD group - "Crash pad")
Remove the electronic steering column lock connector (A).
Lower the steering column and shaft.
(Refer to the ST group - "Steering column and shaft")
Remove the electronic steering column lock (A) after removing shear bolts.
(Refer to the ST group - "Steering column and shaft")
Install the electronic steering column lock.
After checking that the lock warks properly, tighten the shear bolts until the head twists off.
Tightening Torque :
9 ~ 13 N.m (0.7 ~ 1.3 kgf.m, 5.0 ~ 9.0 lb.ft)
Install the steering column shroud assembly.
Install the crash pad lower panel.
Install the negative(-) battery terminal.
