Bleeding air procedure in low pressure fuel circuit

After removing or replacing the part below, bleed air in low pressure fuel circuit.

-

Fuel Tank

-

Fuel Sender

-

Fuel Filter

-

High Pressure Fuel Pump

-

Low Pressure Fuel Lines

1.

Turn ignition switch OFF.

2.

Connect the GDS to Data Link Connector (DLC).

3.

Turn ignition switch ON.

4.

Select "Vehicle, Model year, Engine, System".

5.

Select "Vehicle S/W Management".

6.

Select "Fuel line Air removal".

7.

Perform the procedure in accordance with the message.

Яндекс.Метрика